Please wait
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Masters/Doctoral Thesis for Tohoku University students
%
% Author:
% Tran Quang-Thanh (https://thanhqtran.github.io)
% This file was modified upon a template obtained from:
% http://www.LaTeXTemplates.com
% generated by the following author:
% Steve Gunn (http://users.ecs.soton.ac.uk/srg/softwaretools/document/templates/)
% Sunil Patel (http://www.sunilpatel.co.uk/thesis-template/)
%
% Template license:
% CC BY-NC-SA 3.0 (http://creativecommons.org/licenses/by-nc-sa/3.0/)
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%----------------------------------------------------------------------------------------
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%----------------------------------------------------------------------------------------
\documentclass[
11pt, % The default document font size, options: 10pt, 11pt, 12pt
oneside, % Two side (alternating margins) for binding by default, uncomment to switch to one side
english, % ngerman for German
singlespacing, % Single line spacing, alternatives: onehalfspacing or doublespacing
%draft, % Uncomment to enable draft mode (no pictures, no links, overfull hboxes indicated)
%nolistspacing, % If the document is onehalfspacing or doublespacing, uncomment this to set spacing in lists to single
liststotoc, % Uncomment to add the list of figures/tables/etc to the table of contents
%toctotoc, % Uncomment to add the main table of contents to the table of contents
%parskip, % Uncomment to add space between paragraphs
%nohyperref, % Uncomment to not load the hyperref package
%headsepline, % Uncomment to get a line under the header
%chapterinoneline, % Uncomment to place the chapter title next to the number on one line
%consistentlayout, % Uncomment to change the layout of the declaration, abstract and acknowledgements pages to match the default layout
]{MastersDoctoralThesis} % The class file specifying the document structure
%
%-----Some essential packages----------
\usepackage[utf8]{inputenc} % Required for inputting international characters
\usepackage[T1]{fontenc} % Output font encoding for international characters
\usepackage{mathpazo} % Use the Palatino font by default
\usepackage{hyperref}
\usepackage{amsmath}
\usepackage{amsfonts}
\usepackage{amssymb}
\usepackage{graphicx}
\usepackage{caption}
\captionsetup{justification = raggedright,
singlelinecheck = false}
\usepackage{subcaption}
\usepackage{tikz}
\usepackage{multirow}
\usepackage{xcolor}
\usepackage{graphicx}
\usepackage{subcaption}
\usepackage[bottom]{footmisc}
\usepackage{float}
\usepackage{pgfplots}
\pgfplotsset{compat=1.17}
%----------- Generate syntax highlighted code (optional)--------
%\usepackage{verbatim}
%\usepackage{minted}
%Copy the following PdfLatex build command (without%) in order to run minted:
%TexStudio > Preferences > Commands > PdfLaTeX
%pdflatex -synctex=1 -interaction=nonstopmode --shell-escape %.tex
%% Debug for Python user: if you encounter pygmentize error, do this:
%Copying pygmentize file from "/Library/Frameworks/Python.framework/Versions/2.6/bin/pygmentize" to "/usr/local/bin"
%See more: https://www.overleaf.com/learn/latex/Code_Highlighting_with_minted
%----------- Use .bib to generate reference list -------------
\usepackage[backend=bibtex,style=authoryear,natbib=true]{biblatex}
% Use the bibtex backend with the authoryear citation style (which resembles APA)
%Commands:
%use \textcite{} to cite as Author(year)
%use \parencite{} to cite as (Author, year)
\usepackage[autostyle=true]{csquotes} % Required to generate language-dependent quotes in the bibliography
\addbibresource{reference.bib} % The filename of the bibliography
%---------- Style Options (uncomment to enable) -----------
%\renewcommand*{\thefootnote}{(\arabic{footnote})} %Enable to Put braces around footnotes
%\addto\captionsenglish{\renewcommand\chaptername{Section}} %Enable to Use "sections" instead of "chapters"
%\newcommand{\RomanNum}[1]{\MakeUppercase{\romannumeral #1}} %Enable this option to be able to write Roman Numerals (I, II, III) by calling an equivalent number.
%usage: \RomanNum{10} %will generate "X"
%----------------------------------------------------------------------------------------
% MARGIN SETTINGS
%----------------------------------------------------------------------------------------
\geometry{
paper=a4paper, % Change to letterpaper for US letter
inner=2.5cm, % Inner margin
outer=3.8cm, % Outer margin
bindingoffset=.5cm, % Binding offset
top=1.5cm, % Top margin
bottom=1.5cm, % Bottom margin
%showframe, % Uncomment to show how the type block is set on the page
}
%----------------------------------------------------------------------------------------
% THESIS INFORMATION
%----------------------------------------------------------------------------------------
\thesistitle{An Awesome Title} % Your thesis title, this is used in the title and abstract, print it elsewhere with \ttitle
\supervisor{Professor X} % Your supervisor's name, this is used in the title page, print it elsewhere with \supname
\examiner{} % Your examiner's name, this is not currently used anywhere in the template, print it elsewhere with \examname
\degree{Doctor of Philosophy} % Your degree name, this is used in the title page and abstract, print it elsewhere with \degreename
\author{Your Name} % Your name, this is used in the title page and abstract, print it elsewhere with \authorname
\addresses{Earth} % Your address, this is not currently used anywhere in the template, print it elsewhere with \addressname
\subject{Economics} % Your subject area, this is not currently used anywhere in the template, print it elsewhere with \subjectname
\keywords{} % Keywords for your thesis, this is not currently used anywhere in the template, print it elsewhere with \keywordnames
\university{\href{http://www.tohoku.ac.jp/en/}{Tohoku University}} % Your university's name and URL, this is used in the title page and abstract, print it elsewhere with \univname
\department{Graduate School of Economics} % Your department's name and URL, this is used in the title page and abstract, print it elsewhere with \deptname
\group{Global Program} % Your research group's name and URL, this is used in the title page, print it elsewhere with \groupname
\faculty{Faculty of Economics} % Your faculty's name and URL, this is used in the title page and abstract, print it elsewhere with \facname
\AtBeginDocument{
\hypersetup{pdftitle=\ttitle} % Set the PDF's title to your title
\hypersetup{pdfauthor=\authorname} % Set the PDF's author to your name
\hypersetup{pdfkeywords=\keywordnames} % Set the PDF's keywords to your keywords
}
\begin{document}
\frontmatter % Use roman page numbering style (i, ii, iii, iv...) for the pre-content pages
\pagestyle{plain} % Default to the plain heading style until the thesis style is called for the body content
%----------------------------------------------------------------------------------------
% TITLE PAGE
%----------------------------------------------------------------------------------------
\begin{titlepage}
\begin{center}
\vspace*{.05\textheight}
{\scshape\LARGE \univname\par}\vspace{1.5cm} % University name
\includegraphics[scale=0.15]{logo} \vspace{0.5cm} %Download the logo from here: https://i.imgur.com/gRUcrqO.png
\textsc{\Large Doctoral Thesis }\\[0.5cm] % Thesis type
\HRule \\[0.4cm] % Horizontal line
{\huge \bfseries \ttitle\par}\vspace{0.4cm} % Thesis title
\HRule \\[1.5cm] % Horizontal line
\begin{minipage}[t]{0.4\textwidth}
\begin{flushleft} \large
\emph{Author:}\\
{\authorname} % Author name - remove the \href bracket to remove the link
\end{flushleft}
\end{minipage}
\begin{minipage}[t]{0.4\textwidth}
\begin{flushright} \large
\emph{Supervisor:} \\
{\supname} % Supervisor name - remove the \href bracket to remove the link
\end{flushright}
\end{minipage}\\[2cm]
%\vfill
\large \textit{A thesis submitted in fulfillment of the requirements\\ for the \degreename}\\[0.3cm] % University requirement text
\textit{of the}\\[0.4cm]
\groupname\\ \facname\\ \deptname\\[1.5cm] % Research group name and department name
\today
%\large \today \\[2cm] % Date
%\date{June 29, 2021}
%\vfill
%\includegraphics{logo} % University/department logo - uncomment to place it
%\vfill
\end{center}
\end{titlepage}
%\iffalse %Uncomment this and the command \fi below to disable this page
%----------------------------------------------------------------------------------------
% DECLARATION PAGE
%----------------------------------------------------------------------------------------
\begin{declaration}
%\addchaptertocentry{\authorshipname} % Add the declaration to the table of contents
\noindent I, \authorname, declare that this thesis titled, \enquote{\ttitle} and the work presented in it are my own. I confirm that:
\begin{itemize}
\item This work was done wholly or mainly while in candidature for a research degree at this University.
\item Where any part of this thesis has previously been submitted for a degree or any other qualification at this University or any other institution, this has been clearly stated.
\item Where I have consulted the published work of others, this is always clearly attributed.
\item Where I have quoted from the work of others, the source is always given. With the exception of such quotations, this thesis is entirely my own work.
\item I have acknowledged all main sources of help.
\item Where the thesis is based on work done by myself jointly with others, I have made clear exactly what was done by others and what I have contributed myself.\\
\end{itemize}
\noindent Signed:\\
\rule[0.5em]{25em}{0.5pt} % This prints a line for the signature
\noindent Date:\\
\rule[0.5em]{25em}{0.5pt} % This prints a line to write the date
\end{declaration}
%\fi %uncomment, together with \Leftrightarrowalse above to disable pages
%\cleardoublepage
%----------------------------------------------------------------------------------------
% QUOTATION PAGE
%----------------------------------------------------------------------------------------
%\vspace*{0.2\textheight}
%\noindent\enquote{\itshape Thanks to my solid academic training, today I can write hundreds of words on virtually any topic without possessing a shred of information, which is how I got a good job in journalism.}\bigbreak
%\hfill Dave Barry
%----------------------------------------------------------------------------------------
% ACKNOWLEDGEMENTS
%----------------------------------------------------------------------------------------
\begin{acknowledgements}
%\addchaptertocentry{\acknowledgementname} % Add the acknowledgements to the table of contents
I would like to thank my supervisor...
\end{acknowledgements}
%----------------------------------------------------------------------------------------
% ABSTRACT PAGE
%----------------------------------------------------------------------------------------
\begin{abstract}
\addchaptertocentry{\abstractname} % Add the abstract to the table of contents
Content of your abstract
\vfill
\keywordnames
\end{abstract}
%----------------------------------------------------------------------------------------
% LIST OF CONTENTS/FIGURES/TABLES PAGES
%----------------------------------------------------------------------------------------
\tableofcontents % Prints the main table of contents
\listoffigures % Prints the list of figures
\listoftables % Prints the list of tables
%----------------------------------------------------------------------------------------
% ABBREVIATIONS
%----------------------------------------------------------------------------------------
\begin{abbreviations}{ll} % Include a list of abbreviations (a table of two columns)
\textbf{GDP} & \textbf{G}ross \textbf{D}omestic \textbf{P}roduct \\
\textbf{GHO} & \textbf{G}lobal \textbf{H}ealth \textbf{O}bservatory \\
\end{abbreviations}
%----------------------------------------------------------------------------------------
% PHYSICAL CONSTANTS/OTHER DEFINITIONS
%----------------------------------------------------------------------------------------
%\begin{constants}{lr@{${}={}$}l} % The list of physical constants is a three column table
% The \SI{}{} command is provided by the siunitx package, see its documentation for instructions on how to use it
%Speed of Light & $c_{0}$ & \SI{2.99792458e8}{\meter\per\second} (exact)\\
%Constant Name & $Symbol$ & $Constant Value$ with units\\
%\end{constants}
%----------------------------------------------------------------------------------------
% SYMBOLS
%----------------------------------------------------------------------------------------
%\begin{symbols}{lll} % Include a list of Symbols (a three column table)
%$\pi$ & survival rate & \% \\
%$l$ & retirement choice & \\
%$a$ & distance & \si{\meter} \\
%$P$ & power & \si{\watt} (\si{\joule\per\second}) \\
%Symbol & Name & Unit \\
%\addlinespace % Gap to separate the Roman symbols from the Greek
%$\omega$ & angular frequency & \si{\radian} \\
%\end{symbols}
%----------------------------------------------------------------------------------------
% DEDICATION
%----------------------------------------------------------------------------------------
%\dedicatory{For/Dedicated to/To my\ldots}
%\fi %uncomment together with \Leftrightarrowalse above to displaye
%----------------------------------------------------------------------------------------
% THESIS CONTENT - CHAPTERS
%----------------------------------------------------------------------------------------
\mainmatter % Begin numeric (1,2,3...) page numbering
\pagestyle{thesis} % Return the page headers back to the "thesis" style
% Include the chapters of the thesis as separate files from the Chapters folder
% Uncomment the lines as you write the chapters
\include{Chapters/Chapter1}
\include{Chapters/Chapter2}
%\include{Chapters/Chapter3}
%\include{Chapters/Chapter4}
%\include{Chapters/Chapter5}
%----------------------------------------------------------------------------------------
% THESIS CONTENT - APPENDICES
%----------------------------------------------------------------------------------------
\appendix % Cue to tell LaTeX that the following "chapters" are Appendices
% Include the appendices of the thesis as separate files from the Appendices folder
% Uncomment the lines as you write the Appendices
\include{Appendices/AppendixA}
%\include{Appendices/AppendixB}
%\include{Appendices/AppendixC}
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY
%----------------------------------------------------------------------------------------
%to cite, use \textcite{citation name}, if there is no cite, the bibliography will not be generated.
\printbibliography[
heading=bibintoc,
title={References}
] %bibintoc to include ref. list in toc, title for references.
%----------------------------------------------------------------------------------------
\end{document}
Overleaf is perfect for all types of projects — from papers and presentations to newsletters, CVs and much more! It's also a great way to learn how to use LaTeX and produce professional looking projects quickly.
Upload or create templates for journals you submit to and theses and presentation templates for your institution. Just create it as a project on Overleaf and use the publish menu. It's free! No sign-up required.
New template are added all the time. Follow us on twitter for the highlights!
Overleaf is a free online collaborative LaTeX editor. No sign up required.
Learn more